CipherLab 8000 사용자 설명서 - 페이지 7

{카테고리_이름} CipherLab 8000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CipherLab 8000 12 페이지. Modem cradle
CipherLab 8000에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (4 페이지), 설치 (2 페이지), 빠른 설치 (2 페이지)

페이지 인쇄

terminal to be cloned without going through a PC.

3.2 System

The system module provides the following services:

1. Information

The system information includes hardware version (H/W), serial number (S/N), manufacturing

date (M/D), kernel version (KNL), C library (LIB) or BASIC run-time version (BAS),

application program version (USR) and hardware configurations (DEV).

2. Settings

The system settings include the following:

1. Clock

Set date and time for the system.

2. Backlight

Set the staying on duration for the keyboard and LCD backlight.

Default: the lights go off after 20 seconds.

3. CPU Speed

Set CPU running speed. There are five speeds available:

Full speed, half speed, quarter speed, eighth speed and sixteenth speed.

Default: Full speed

4. Auto Off

Set time threshold for automatically power off when no operation is taking place during

that specified period. If this value is set to zero, this function will be disabled.

Default: 10 minutes

5. Power On Mode

There are two possible selections: Program Resume, which starts from the program being

used during the last session before the last power-off; and Program Restart, which starts

with a new program.

Default: Program Resume

6. Key Click

Select a tone for the beeper or disable the beeper when the user presses a key button.

Default: Enable

7. System Password

Set a password to protect the user from entering the system menu.

Default: no password is set

3. Tests

1. Reader

To test the reading performance of the scanner. The following barcodes are default to

enable:

Code 39

Industrial 25

Interleave 25

Codabar

Code 93