Accurate Technology ProScale 18W 사용자 설명서 - 페이지 19
{카테고리_이름} Accurate Technology ProScale 18W에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Accurate Technology ProScale 18W 20 페이지.
페이지 인쇄Frequently Asked Questions
Can I mount the Scale/Encoder without the connector link/guide clip?
Yes. However, the connector link and guide clip serve to provide an
accurate method of transferring the movement of the encoder or
scale, while also absorbing any stresses that may occur. If they are
not used, your system could be damaged and the warranty could
be voided.
What does no Enc
no Enc mean?
no Enc
no Enc
If the encoder is off the scale, or unplugged from the readout,
a no Enc
no Enc will appear on the readout. To clear the error:
no Enc
no Enc
1. Be sure the encoder is on the scale.
2. Plug the encoder into the readout.
3. Unplug the encoder from the readout for one second then
reconnect it.
What does b FAIL
b FAIL mean?
b FAIL
b FAIL
When the readout displays this message it means the battery voltage
has dropped to a level where reliable operation is no longer possible.
Install new batteries to clear this message.
What does P FAIL
P FAIL
P FAIL mean?
P FAIL
When the readout displays this message it means the battery voltage
has dropped to a level where reliable programming is not possible.
Install new batteries to clear this message.
How do I calibrate my ProScale?
There is no calibration available or necessary for the ProScale.
System accuracy will depend on the accuracy of the ProScale Scale
itself and the quality of the installation.
Accurate Technology ProScale Model 18W
Page 19 of 20