Accurate Technology ProScale 사용자 설명서 - 페이지 5
{카테고리_이름} Accurate Technology ProScale에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Accurate Technology ProScale 20 페이지. Flush mount readouts
Accurate Technology ProScale에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (17 페이지)
페이지 인쇄S
1
ECTION
Introduction
Thank you for purchasing the ProScale receiver system. This radio receiver
unit is designed to be used in conjunction with Accurate Technology, Inc.
ProScale™ linear measuring systems that are equipped with integral RF
transmitters (digital display firmware version 2.1 or above).
The purpose of this system is to provide a one-way wireless data
communication channel between a ProScale measuring system and a
computer or other computing device. Depending on the receiver model that
you have purchased, the unit has the ability to receive signals from either a
single ProScale display or several displays.
The receiver provides RS-232 serial data in standard ASCII text format and
may be configured for various output formats. In addition, the receiver will
support standard baud rates from 2400 to 115200 bits per second.
The following is a list of features for the ProScale RF receiver:
•
Six output formats to support various data collection requirements.
•
Programmable data field delimiter character.
•
Programmable line terminator.
•
Record start sentinel character enable/disable.
•
Character echo enable/disable.
•
Baud rate selection.
•
System ID selection. Prevents interference from multiple Pro-RF
systems.
•
Typical signal range: 50' to 100' depending on the environment.
•
Serial output transmit/receive reversal via jumper selection (null
modem). Allows unit to switch from slave mode (PC use) to master
mode (for use with other devices).
•
Receiver configuration is stored in non-volatile memory. Configuration
is completed using a standard terminal program such as
HyperTerminal™.
Accurate Technology Inc.
G
ENERAL
I
NFORMATION
Page 5 of 20