Arcadian Networks V487 사용자 설명서 - 페이지 4
{카테고리_이름} Arcadian Networks V487에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Arcadian Networks V487 17 페이지. Wireless modem unit
페이지 인쇄V487i WMU User's Guide
Installation and Safety Information
The following information is provided to ensure safe operation of this equipment.
Arcadian Networks assumes no liability in the event that the customer fails to
comply with the following safety precautions and warnings.
DC System Power-on
1- When connecting the DC power lines, make sure to connect the Ground line
first.
2- When disconnecting the DC power lines, make sure to disconnect Ground
last.
3- FUSE Replacement: Make sure to use a fuse of the same type and value!
4- EUT shall be powered from limited power source up to 100VA according UL
60950-1 requirements.
L'équipement sous tension doit être branché a une source limitée au maximum
de100 VA conformément a UL 60950-1.
5- Voltage rating is from 9.5VDC to Maximum 29VDC
La tension d'opération est de 9.5 VDC à 29 VDC maximum.
Earthing
2
The minimum cross sectional area of the protective earthing should be 1mm
.
2.
La section du fil de terre doit être d'un minimum 1mm
Cables
The power, Ethernet and RS232 cables shall be limited up to 140 Feet (42.6
meter).
Les branchements électriques, Ethernet & RS232 doivent être limités a un
maximum de 140 pieds (42.6 mètres)
Repair Safety
Repairs of modem should take place only in Arcadian Networks service
laboratories or in service laboratories of other Arcadian Networks formally
approved distributors.
In case of field handling, disconnect the unit from power supply for safest repair.
- 4 -