Arcadyan WA9102BAC33 사용자 설명서 - 페이지 3

{카테고리_이름} Arcadyan WA9102BAC33에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Arcadyan WA9102BAC33 5 페이지.

Device Connectivity

Step 1 - Connect one end of the provided Ethernet cable into the LAN ports

on the Wireless Access Point. Then insert the other end of the cable into the

Ethernet port of your PC or other Ethernet network device.

Step 2 - Plug the power adapter into the power socket on the rear of the

access point, and the other end into a power outlet.

Step 3 - Wireless Link: On the Windows desktop, click Start/Control

Panel/Network and Internet/View network status and tasks/Connect to a

network to browse the available wireless networks. Choose Enterprise

Access Point from the list and click Connect button to start using the wireless

network.

There are two slots on the base of the access point for mounting the device

on the wall. You will need two screws of less than 5 mm in diameter to wall

mount the access point.

To wall mount the device:

1. Determine where you want to mount the access point. Make sure you

choose a central location away from potential sources of interference like

microwave ovens and cordless phones.

2. Drill two holes into the wall and insert your two screws 128 mm apart to

hang the device.

3. Insert a screw into each hole, and leave 5 mm of each head exposed.

4. Maneuver the device so the wall-mount slots line up with the two screws.

5. Place the wall-mount slots over the screws and slide the device down until

the screws fit snugly into the wall-mount slots.

Note: When wall mounting the access point, be sure that it is within reach of

the power outlet or alternative sources of power supply.

