CipherLab 8000 설치
{카테고리_이름} CipherLab 8000에 대한 설치을 온라인으로 검색하거나 PDF를 다운로드하세요. CipherLab 8000 2 페이지. Modem cradle
CipherLab 8000에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (4 페이지), 사용자 설명서 (12 페이지), 빠른 설치 (2 페이지)
페이지 인쇄
8000 GPRS Cradle Installation
8000 GPRS Cradle Installation
8000 GPRS Cradle Installation
8000 GPRS Cradle Installation
Fig. 1
Fig. 1
Fig. 1
Fig. 1
Intended Purpose
Intended Purpose
Intended Purpose
Intended Purpose
In addition to charging the 8000 Series Mobile Computer, the GPRS cradle is specifically
In addition to charging the 8000 Series Mobile Computer, the GPRS cradle is specifically
In addition to charging the 8000 Series Mobile Computer, the GPRS cradle is specifically
In addition to charging the 8000 Series Mobile Computer, the GPRS cradle is specifically
designed for connecting the mobile computer to WWAN via GPRS or GSM data services.
designed for connecting the mobile computer to WWAN via GPRS or GSM data services.
designed for connecting the mobile computer to WWAN via GPRS or GSM data services.
designed for connecting the mobile computer to WWAN via GPRS or GSM data services.
Please contact your service provider for information on GSM/GPRS data services.
Please contact your service provider for information on GSM/GPRS data services.
Please contact your service provider for information on GSM/GPRS data services.
Please contact your service provider for information on GSM/GPRS data services.
Dual-Band EGSM900 and GSM1800
Dual-Band EGSM900 and GSM1800
Dual-Band EGSM900 and GSM1800
Dual-Band EGSM900 and GSM1800
GPRS multi-slot Class 10
GPRS multi-slot Class 10
GPRS multi-slot Class 10
GPRS multi-slot Class 10
Full PBCCH support
Full PBCCH support
Full PBCCH support
Full PBCCH support
Comply with GSM phase 2/2+
Comply with GSM phase 2/2+
Comply with GSM phase 2/2+
Comply with GSM phase 2/2+
Output power — Class 4 (2W) for EGSM900 and Class 1 (1W) for GSM1800
Output power — Class 4 (2W) for EGSM900 and Class 1 (1W) for GSM1800
Output power — Class 4 (2W) for EGSM900 and Class 1 (1W) for GSM1800
Output power — Class 4 (2W) for EGSM900 and Class 1 (1W) for GSM1800
Power consumption
Power consumption
Power consumption
Power consumption
— GSM Mode: Typical 900 mA (including battery charging)
— GSM Mode: Typical 900 mA (including battery charging)
— GSM Mode: Typical 900 mA (including battery charging)
— GSM Mode: Typical 900 mA (including battery charging)
— GPRS Mode (Class 10): Typical 1200 mA (including battery charging)
— GPRS Mode (Class 10): Typical 1200 mA (including battery charging)
— GPRS Mode (Class 10): Typical 1200 mA (including battery charging)
— GPRS Mode (Class 10): Typical 1200 mA (including battery charging)
Installation
Installation
Installation
Installation
1
1
1
1
Screw the antenna to the cradle.
Screw the antenna to the cradle.
Screw the antenna to the cradle.
Screw the antenna to the cradle.
2
2
2
2
Remove the rubber cover at the back of the cradle.
Remove the rubber cover at the back of the cradle.
Remove the rubber cover at the back of the cradle.
Remove the rubber cover at the back of the cradle.
3
3
3
3
Insert your SIM card with contacts facing down, and replace the rubber cover.
Insert your SIM card with contacts facing down, and replace the rubber cover.
Insert your SIM card with contacts facing down, and replace the rubber cover.
Insert your SIM card with contacts facing down, and replace the rubber cover.
4
4
4
4
Seat the mobile computer in the cradle.
Seat the mobile computer in the cradle.
Seat the mobile computer in the cradle.
Seat the mobile computer in the cradle.
5
5
5
5
Connect the power supply cord to a suitable power outlet.
Connect the power supply cord to a suitable power outlet.
Connect the power supply cord to a suitable power outlet.
Connect the power supply cord to a suitable power outlet.
The cradle's first LED will become red, indicating it is ready for charging the mobile
The cradle's first LED will become red, indicating it is ready for charging the mobile
The cradle's first LED will become red, indicating it is ready for charging the mobile
The cradle's first LED will become red, indicating it is ready for charging the mobile
6
6
computer.
computer.
computer.
computer.
(Fig. 6)
(Fig. 6)
(Fig. 6)
(Fig. 6)
Note that you will need pliers to take out your SIM card when it is not desired in use.
Note that you will need pliers to take out your SIM card when it is not desired in use.
Note that you will need pliers to take out your SIM card when it is not desired in use.
Note that you will need pliers to take out your SIM card when it is not desired in use.
www.cipherlab.com
www.cipherlab.com
www.cipherlab.com
www.cipherlab.com
Fig. 2
Fig. 2
Fig. 2
Fig. 3
Fig. 3
For initial configuration, skip steps 2 and 3.
For initial configuration, skip steps 2 and 3.
For initial configuration, skip steps 2 and 3.
For initial configuration, skip steps 2 and 3.
(Fig. 1)
(Fig. 1)
(Fig. 1)
(Fig. 1)
(Fig. 2)
(Fig. 2)
(Fig. 2)
(Fig. 2)
(Fig. 4)
(Fig. 4)
(Fig. 4)
(Fig. 4)
(Fig. 5)
(Fig. 5)
(Fig. 5)
(Fig. 5)
Fig. 4
Fig. 4
Specifications
Electrical Characteristics
Power Adapter
Power Adapter
Power Adapter
Power Adapter
Environmental Characteristics
Temperature
Humidity (non-condensing)
Certification
Europe
China
Notifications
LED
(Fig. 3)
(Fig. 3)
(Fig. 3)
(Fig. 3)
Power
Tx/Rx
Link
Tx/Rx
Tx/Rx
Link
Link
Power
Power
Fig. 5
Fig. 5
—
Output
DC 5V, Maximum (peak) 2000 mA
—
Input
AC 100~240 V, 50/60 Hz
Operating -10° C ~ 60° C
Operating 10% ~ 90%
CE
SRMC, MII
Status
Meaning
Solid red
Power ON
Off
Power OFF
Flashing green
Transmitting/receiving data
Off
No activity
Dialing out
Flashing green
Connected
Solid green
Disconnected
Off
Copyright
Copyright
Copyright
Copyright
Fig. 6
Fig. 6
Storage -20° C ~ 70° C
Storage 5% ~ 95%
2008 CipherLab Co., Ltd.
2008 CipherLab Co., Ltd.
2008 CipherLab Co., Ltd.
2008 CipherLab Co., Ltd.