aXtion CWA609 설치 매뉴얼 - 페이지 4

{카테고리_이름} aXtion CWA609에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. aXtion CWA609 5 페이지.

Water Stopper

Replacing

Installation

If water-resistant (IP65) is required while charging, replace the blue water stopper with the gray one

by following directions below. Call us to get the Gray Water Stopper.

Grasp one side of blue rubber stopper and pull to

remove

Pull each of the two rubber fingers through the holes

until they are seated properly

Water-resistant

IP65

Installation Guide

* CAUTION: WATER-RESISTANCE WHILE

CHARGING - Removing of the included

charging cable from the GRAY water

stopper will interrupt the water-resistant

feature. We do not recommend constant

removal of the cable to increase the

Hand Strap

longevity of the products and to ensure

proper protection.

Cable is not

included in the

package.

pro M

ご利用ガイド

Charging

@IP65

Water-

resistant*

Blue

Align stopper with holes and ensure proper orienta-

tion (refer to photo), apply firm pressure to the

charging port until the stopper sits into place

Using a utility knife carefully cut the excess rubber

Gray

Call us to get the Gray Water Stopper.

Top

d1>d2

pro M

(949) 216-8888

Monday through Friday,

9:00 a.m. to 5:00 p.m. ( PST)