aXtion Pro MP 설치 매뉴얼 - 페이지 4
{카테고리_이름} aXtion Pro MP에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. aXtion Pro MP 4 페이지.
페이지 인쇄Cleaning Instructions
We recommend cleaning the case after every use cycle. Most
hospital-grade disinfectant wipes with high alcohol concentrate are safe
to use on the aXtion Pro case. A few that we recommend are:
• Sani-Cloth AF3
• Cavi-Wipes
• Clorox Healthcare Bleach Germicidal Wipes
Follow these steps:
1. Clean the back cover with a hospital-grade wipe, using a small stroking
motion. Pay special attention to the crevices.
2. Use a new hospital-grade wipe to clean the front cover and screen
protector.
3. Let the case air dry before using.
Accessories
Congratulations on the purchase of your new aXtion Pro case from The Joy Factory Inc!
BEFORE USE READ ALL INSTRUCTIONS CAREFULLY. IMPROPER USE OF THE
CASE COULD RESULT IN DAMAGE TO YOUR DEVICE.
This aXtion Pro case is designed only for the device type listed on the box. Thus it is only
intended for and only warrantied for proper use with that specific tablet and not for use with
another device type. Because different generations of tablets have different specifications,
please refer to the packaging for your aXtion Pro case to determine whether your tablet will
be compatible with the aXtion Pro case you have purchased.
If you are not certain whether the device you intend to use with the aXtion Pro case is
compatible with the tablet model you have, please contact the company from which you
purchased the device or the manufacturer of the device to determine whether it is a model
supported by this aXtion Pro case.
All aXtion Pro cases are certified IP68 waterproof. If you have any questions about whether
your case will protect against water in certain situations, contact The Joy Factory prior to
using the case in those situations. The IP68 rating means that the aXtion Pro case is certified
as "dust tight" (that is, no dust will enter the case when it is properly installed and used). All
aXtion Pro cases are also designed to be shock resistant. That is, these cases are designed
to provide a degree of confidence that your aXtion Pro case can physically and functionally
withstand the relatively infrequent, non-repetitive shocks encountered in various
environments.
It is critical that before using your aXtion Pro case with your device, you first perform a
waterproof test without your device in the case. It is especially important to ensure the case is
properly closed when exposing it to water. An improperly closed case will render it
non-waterproof and will damage the device. Do not use your aXtion Pro case with your
for
DISCLAIMER FOR aXtion
Pro Military Grade and Waterproof Certified Cases
®
Internal cleaning may be done as needed following
these steps.
1. Remove the tablet from the case and set aside.
2. Clean the inside back cover with a hospital-grade wipe, using a
small stroking motion. Pay special attention to the crevices.
3. Use a new hospital-grade wipe to clean the inside front cover and
screen protector.
4. Let the case air dry before putting the tablet into the case.
* Hospital-grade disinfectant wipes may have more detailed instructions
for use. Please refer to the manufacturer's instructions.
* These instructions are only for cleaning cases by The Joy Factory. To
clean the tablet, please refer to the manufacturer's instructions.
MagConnect
Mounts
device without first ensuring you are readily familiar with your aXtion Pro case and how it
functions.
If the aXtion Pro case is damaged or not functioning properly for any reason; immediately stop
use. The Joy Factory expressly disclaims all liability and all warranties, whether expressed or
implied, for use of an aXtion Pro case that has been damaged for any reason. The case is
covered under our one year manufacturing warranty and can be replaced free of charge for
any manufacturing defects. If you believe the case has a manufacturing defect, cease use
immediately and contact The Joy Factory by email at [email protected] or by
telephone at (949) 216-8888, Monday through Friday, 9:00 a.m. to 5:00 p.m., Pacific
Standard Time. The Joy Factory will not replace an aXtion Pro case that is damaged, other
than one with a manufacturing defect, The Joy Factory is not liable to replace or pay for
replacement of your device or any additional items which may be damaged from use of a
case with manufacturing defects.
The Joy Factory disclaims all liability for lost aXtion Pro cases and any device stored in a lost
case.
Do not use your aXtion Pro case with any other case or bumper. Use of an additional case or
bumper will render the aXtion Pro Case non-waterproof, and The Joy Factory disclaims all
liability from such use and will void any and all warranties, expressed or implied.
Any alteration to your aXtion Pro case will void any and all warranties and guarantees, whether
expressed or implied, and The Joy Factory disclaims any and all liability for damages arising
from use of an altered aXtion Pro case.
Using the aXtion Pro case with any other device could lead to an improper seal of the case
and will render the case non-waterproof. The Joy Factory disclaims all liability and all
warranties, whether expressed or implied, for use of the aXtion Pro case with any other
device.
Shoulder Strap
Contact us:
(949) 216-8888
Monday through Friday,
9:00 a.m. to 5:00 p.m. (PST)