AXTON A544DSP 설치 및 운영 매뉴얼 - 페이지 5

{카테고리_이름} AXTON A544DSP에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AXTON A544DSP 17 페이지. 4 channel class a/b car amplifier

APP INSTALLATION A544DSP

For Android phones only:

1. Download the A544DSP_V1.0.apk by scan of the QR code or download from the Axton

website www.axton.de. Install A544DSP_V1.0.apk to your Android smart phone.

2. Turn on Bluetooth, but do not pair the A544DSP in the Bluetooth settings.

3. Make sure that you enabled "Location" in your settings.

4. Open the app and press the "Connect" button in order to connect the amp with the app.

For iOS smart phones only:

1. Visit the Apple AppStore, search for "A544DSP" and install the app.

2. Turn on Bluetooth, but do not pair the A544DSP in the Bluetooth settings.

3. Open the app and press the "Connect" button in order to connect the amp with the app.

Scan to download and in-

stall the app from the Apple

AppStore

BLUETOOTH AUDIO STREAMING

Open the Bluetooth settings on your smartphone and search for „BT Audio" device. Press

"connect" and enter the code "1234" to get the amp paired with your mobile. When you start

playing music on your mobile, the amp automatically mute the signal from your car stereo. Please

note: you cannot hear any warnings or navigation notes from your car stereo.

Scan to download and install the app

from the Axton homepage

www.axton.de

– 8 –

APP FUNCTIONS A544DSP

Connect

Start the app and touch the "Connect" button in the upper center of the screen. After the

connection procedure is done successfully, the "Connect" button is getting green and the app

downloads the current settings from the amplifier.

Save to AMP

When you have done the settings, touch the „Save to AMP" button and chose the favorite to

transfer the settings to the amplifier. During the saving process do not switch off the amplifier as

this may lead to malfunction and/or damage.

Save to Phone

You can save the settings on your smartphone. To do this, press „Save on Phone" button, enter the

desired filename, and confirm with „OK".

Load File

Shows the list of files saved on the smartphone. Touch the desired setup to load. If you want to

save the loaded file permanently on the amp, press now „Save to AMP" button.

Load Favorites

Select one of the favorites 1 – 5.

Dynamic Bass

Located on the left edge of the main screen, the "Bass" slider is a very effective way to increase

bass performance without overloading the speakers. Level at "0" = no Dynamic Bass function

active.

Level at "1" to "10" = the higher the value the higher the bass increasing.

– 9 –