CIPU CSPPS703 소유자 매뉴얼 - 페이지 7
{카테고리_이름} CIPU CSPPS703에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CIPU CSPPS703 11 페이지.
페이지 인쇄
Step 2.
The water level of the inground swimming
In order to prevent water from flowing
First screw the adapter into the water
assembly.
Step 1
Step 1
REGULARLY VERIFY
1. The correct attachments of the mechanical parts and of the
1. The correct attachments of the mechanical parts and of the support screws of the pump.
2. The correct position, attachment and condition of the supply cables and of the insulating
2. The correct position, attachment and condition of the supply cables and of the insulating
2. The correct position, attachment and condition of the supply cables and of the insulating
parts.
3. The temperature of the motor. In the event of any excessive high, stop immediately and
3. The temperature of the motor. In the event of any excessive high, stop immediately and
3. The temperature of the motor. In the event of any excessive high, stop immediately and
have it repaired.
4. The vibration of the pump. In the case of any excessive high, stop immediately and have it
the pump. In the case of any excessive high, stop immediately and have it
the pump. In the case of any excessive high, stop immediately and have it
repaired.
CAUTION
Owing to the complexity of the cases covered, the instructions for installation, use and
Owing to the complexity of the cases covered, the instructions for installation, use and
Owing to the complexity of the cases covered, the instructions for installation, use and
maintenance contained in this manual do not attempt to examine all possible
contained in this manual do not attempt to examine all possible and imaginable
cases of service and maintenance. If supplementary instructions are required or special
maintenance. If supplementary instructions are required or special
maintenance. If supplementary instructions are required or special
problems arise, do not hesitate to contact the distributor
TECHNICAL DATA
Item
CSPPS702
Input Power
685w
H. Max
32ft
Q. Max/min
273L
V
115
HZ
60
IP
IPX5
swimming pool is lower than the water inlet of the pump
flowing backward, this pump equipped a check valve.
water inlet of the pump, and then install the connector
Step 2
contact the distributor/agent.
6
pump.
valve.
connector
support screws of the pump.
and imaginable
CSPPS703
878w
36ft
308L
115
60
IPX5