AXTON A594DSP 설치 및 운영 매뉴얼 - 페이지 8
{카테고리_이름} AXTON A594DSP에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AXTON A594DSP 17 페이지. 4 channel class d car amplifier
페이지 인쇄Crossover
In this menu you can assign a frequency band to the connected speakers that corresponds to their
recommended operating range. You can choose independent crossover settings for each channel
separately or for all left and right channels together. Simply use the button "Combine" in the lower
right and choose to copy the values from the left channels to the right one or right to left.
In the "HPF" line underneath the diagram you can set the highpass filter slope (OFF, 6 dB, 12
dB, 18 dB and 24 dB), the filter characteristics (Butterworth, Bessel, Linkwitz) and the cutting
frequency.
In the "LPF" line underneath the diagram you can set the lowpass filter slope (OFF, 6 dB, 12
dB, 18 dB and 24 dB), the filter characteristics (Butterworth, Bessel, Linkwitz) and the cutting
frequency.
The blue line in the diagram shows the set slope of the filter. Setting the slope to „OFF" means
the signal is unfiltered and contains all frequencies.
The filter settings also apply to the corresponding preamp outputs.
Gain Phase Mute
The blue line in the diagram shows the set slope of the filter. Setting the slope to „OFF" means
the signal is unfiltered and contains all frequencies.
The filter settings also apply to the corresponding preamp outputs.
– 14 –
– 15 –