Circe Cycles Morpheus 조립 설명서 - 페이지 6

{카테고리_이름} Circe Cycles Morpheus에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Circe Cycles Morpheus 8 페이지.
Circe Cycles Morpheus에 대해서도 마찬가지입니다: 소유자 매뉴얼 (10 페이지)

페이지 인쇄

Once the crank assmbly is positioned on the main

tube it can be fixed in place using the four M6 hex

bolts and a 10mm spanner.

INSTALLING THE PEDALS

(Your own if not ordered from us) – The pedal

threads are handed. The right hand pedal tightens

in the normal direction; the left-hand pedal has

a left-hand thread, and tightens in the opposite

direction to normal. Tighten the pedals to the

torque shown in Appendix A.

BELL AND REFLECTORS

Reflectors and a bell are supplied with your

tandem. The bell can be mounted anywhere on

the handlebars where it can be reached easily.

The front reflector can also be mounted to the tab

on the end of the boom. The rear reflector fits to

the Captain's seatpost, ensure that the reflector is

visible at the height you intend to have the post at.

If not, you may need to reposition the reflector so

that it is visible.

PRE-RIDE

Check all nuts, bolts and quick releases to make

sure everything is tight (See appendix A for torque

settings). Ensure the wheels spin freely and the

brakes function correctly.

FIRST RIDE

Check the gears shift correctly, refer to the Owner's

manual, or manufacturers manual, for adjustment.

Pay attention to the fit and make any adjustments

required, once you are stationary. Finally, ensure

there are no rattles or unexpected sounds.

You can now refer to the User's manual for final set

up and on-going maintenance.

Circe Cycles