Arcan CP201 조립 지침 매뉴얼 - 페이지 7
{카테고리_이름} Arcan CP201에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Arcan CP201 12 페이지. Shop press
페이지 인쇄PUMP AND RAM ASSEMBLY CONTINUED
7
4. Rest pump against
press and ram
frame for support.
8
This end up
A
This end up
B
CP201 Operation Manual
5. Pump must be threaded
through ram frame and
back out so the hose is
on the outside of the frame.
See Step 6.
WARNING
Hose must be on the OUTSIDE of ram frame, or it will NOT be mountable to the press.
Note: There are two sets of holes for bolts. Use centermost holes on the side.
Note: Ram has been dropped into
ram frame, resting on the bed.
6. Once pump and ram are
on press bed as shown,
you are ready to move
on to mounting the pump
assembly.
Note: Hose from pump's outer side must run BEHIND
the frame. Hose with nozzle will be used later.
Attach bolts up through ram frame to matching holes in press.
Hand tighten. Wrench tighten after both bolts have been installed.
Ram is now able to move left and right within ram frame.
6