Arcan XL2T 사용 설명서 - 페이지 2
{카테고리_이름} Arcan XL2T에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Arcan XL2T 6 페이지. 2 ton extra long and low clearance service jack
페이지 인쇄
INSPECTION
Visual inspection should be made before each use of the jack, checking for leaking hydraulic fluid and damaged, loose or missing parts. Any
jack which appears to be damaged in any way, is found to be badly worn, or operates abnormally MUST BE REMOVED FROM SERVICE
until necessary repairs are made.
Handle
Saddle
SETUP
1.
Depress the upper handle lock in the upper handle while simultaneously inserting the end of the upper handle in the lower handle.
Rotate the upper handle back and forth until the handle lock seats in the hole in the lower handle lock hole.
2.
Unscrew the handle bolt so that it will not interfere with the insertion of the handle in the handle socket. Insert the handle in the handle
socket and rotate the handle assembly back and forth until the release valve fits in the receiver in the bottom of the handle. Secure the
handle in the handle socket by tightening the handle bolt.
3.
Sometime air gets trapped in the hydraulic system during shipping and handling. If the pump feels spongy, or there is not a full
incremental pump stroke, or the jack will not raise to maximum height, follow these instructions in order to purge air from the system:
a.
With the lift arm in its completely retracted position and the pump handle rotated all the way in a clockwise direction until it stops,
rotate the pump handle in a counterclockwise direction two full revolutions.
b.
Proceed to pump the jack 15 full incremental pump strokes.
c.
Rotate the pump handle clockwise until it stops and proceed to pump the handle until the lift arm reaches maximum height.
d.
If the condition seems better, repeat steps "A" through "C" until all air is purged from the system.
XL2T User Manual
Handle
Socket
Handle
Bolt
Lift Arm
Front
Wheels
Handle
Handle
Socket
Chassis
Lower Handle
Lock Hole
2
Handle
Bumper
Rear
Casters
Upper
Handle
Lock
Lower
Handle
Bumper
rev. 122711