Creator C50X 매뉴얼 - 페이지 6

{카테고리_이름} Creator C50X에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Creator C50X 20 페이지. Single vehicle & obdii scanner

Creator C50X

2.4 Product Troubleshooting

Vehicle Linking Error

A communication error occurs if the scan tool

fails to communicate with the vehicle's ECU

(Engine Control Unit). You need to do the

following to check up:

A) Verify that the ignition is ON;

B) Check if the scan tool's OBD II connector

is securely connected to the vehicle's DLC;

C) Verify that the vehicle is OBD2 compliant;

D) Turn the ignition off and wait for about 10

seconds. Turn the

E) Ignition back to on and continue the testing.

F) Verify the control module is not defective

Scan tool doesn't power up

If the scan tool won't power up or operates

incorrectly in any other way, you need to do the

following to check up:

A) Check if the scan tool's OBD II connector

is securely connected to the vehicle's DLC;

B) Check if the DLC pins are bent or broken.

Clean the DLC pins if necessary.

C) Check vehicle battery to make sure it is still

good with at least 8.0 volts.

Single vehicle & OBDII Scanner