Axxera AM118BT 설치 및 사용 설명서 - 페이지 15
{카테고리_이름} Axxera AM118BT에 대한 설치 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Axxera AM118BT 16 페이지. Am/fm receiver with bluetooth and fixed face
페이지 인쇄
~
~\
\
Car Audio
>;~
-
''""'"''-:--)
...
Quick Start Guide
Digital Media Receiver
To download the complete.
model-specific manual. please visit
www.axxeraaudio.com/supporl/manuals.php
or
calll-866-382-5476.
9AM-5PM EST (Monday-Friday).
General Operation
Power On/Off
Press the
c.!;
button to turn the unit on. Press
c.!;
again to
turn unit
off.
Q\anglng Modes
Press MODE to select between Radio. USB.
Bluetooth. AUX.
Modes of operation are shown in the display.
Volume
Adjust volume using volume knob.
Mute
Press
0(
to silence the
audio.
Press
0(
again to resume
listening
at
the previously selected
volume.
Auxltiary
Inputs
Insert a
3.5mm
cable in the units front AUX
port.
Reset
Press the RESET button to reset the unit back to the
factory settings if abnormal operation occurs. The reset
button
is
located on the front panel.
Setting the
Clock
With the unit on. press OISP to display clock
time.
Press and hold OlSP until the hours begins to ftash. then
release. Press the TUNE ...... and TUNE • • to adjust the
hours.
then press the OISP. the minutes begins to flash.
press the TUNE ...... and TUNE • • button to adjust the
minutes. Press DlSP momentarily to save the selected time.
Display
Press OISP to toggle display between various displayed
information.
Audio
I
Menu
Press volume knob momentarily to select between the
audio
functions.
Press and hold volume knob for more
than two seconds to select between the menu functions.
Rotate the volume knob left/right to adjust or activate the
desired function/audio.
To download the complete Owner's Manual for your
radio.
please
visit
www.axxeraaudio.com/supporUmanuals.php
Preparation
Pairing a New
Device
Streaming Audio
Troubloshooting
Bluetooth® Operation•
Before using a Bluetooth device. it must be paired and
connected. Ensure that Bluetooth is activated on your
device before beginning the pairing process.
The head unit broadcasts the pairing signal constantly
when no devices are
connected.
Complete the pairing
sequence from your Bluetooth
device.
Refer to the
owner's manual for your device for more
details.
The device name is
M
Axxera Media PlayerM
The Bluetooth passcode is -1234""
Note:
If
passcode
"1234-
does not pair your device to
the
receiver.
use passcode
·oooo-.
Note:
The head unit can be in any mode of operation
when pairing is performed.
The head unit supports A2DP wireless streaming audio
from a Bluetooth mobile device directly to your head unit.
The following functions can be used to control the music:
• Press • • to skip to the next available audio track.
•· Press ...... to skip to the previous audio track.
• Press
.,_/II
to toggle between play and pause during
playback.
• Not available on all models.
To download the complete Owner's Manual for
your
radio.
please visit www.axxeraaudio.com/support/manuats.php
Installation
Before You Start
• Consult a qualified technician for
instructions.
Dual always recommends
professional installation.
• Disconnect negative battery terminal.
• Remove trim ring from unit (if installed).
•
Remove 2 transit screws located on top of the unit (if
applicable).
• Insert the removal keys. and remove the mounting steeve from the head unit.
Note: Most vehicles require an installation kit. wiring harness and/or antenna
adapter (all sold separately) to properly install the head unit in the vehicle.
Installation Process
1. Carefully remove the existing head unit.
2.
Connect wiring
harness.
Consult a qualified technician if you are unsure.
3. Mount the head unit using the mounting sleeve or ISO brackets (depending
on your
vehicle's
dashboard).
~
-
Connect wiring harness and antenna. Test the head unit for correct
operation.
5. Slide into mounting sleeve to secure. or mount the ISO brackets to the
vehicle.
6.
Snap trim
ring
into
place.
Wiring Connections
The chart below the connection for each
wire
in the wiring harness.
Rod
12V
Ignition
1
Accessory
np,
Yellow
12V
Baftery
I
Memory
Black
Ground
When a suitable ground wire is
not present in the vehicle wiring
Blue
Power Antenna
I
Amp Turn-on
harness.
connect the black ground
G'ey
Ri htFront(+}
wire
to the
vehicle
chassis.
Grey/Black
Right Front
(-)
White
left Front
(+)
Fuse,
White/Black
left Front(-)
When replacing the fuse. make
Violet
Right Rear
1+1
sure new fuse is the correct type
Violet/Black
Ri ht Rear(-}
and
amperage.
Using an incorrect
""'"
left Rear(+)
fuse could damage the
radio.
Green/Blaek
LefiRearH
AMIFM Tuner Operation
Seek Tuning
Press TUNE ...... or TUNE • • to seek to previous or next
strong station.
Manual Tuning
Press and hold the TUNE ...... or TUNE • • to enter manual
tuning mode. Then press TUNE ...... or TUNE • • momentarily
to move radio frequency down or up
one
step at a time.
Press and hold TUNE ...... or TUNE • • to advance quickly.
Band
Press BAND to select between FM1
. FM2. FM3.
AM1
and AM2 bands. Up to six presets can be programmed
for each band. enabling up to 18 FM stations and 12 AM
stations to be stored in memory.
Storing
Presets
Up to 18 FM and 12 AM stations can be
stored.
To store
a station. select the desired band and
station.
Press and
hold the desired preset button (1-6) for more than two
seconds.
When
stored.
the preset number wilt appear in
the display.
RecaWng
Presets
Preset stations can be recalled any time
by
pressing the
corresponding preset
button.
Auto
store
Press and hold
AS/PS
for more than 2 seconds to
store
18 FM stations and 12 AM stations
automatically.
Preset
Scan
Press the AS/PS to recall each preset staion that stored
in the memories in each band.
To download the complete Owner's Manual for your radio.
please visit www.axxeraaudio.com/supportlmanuals.php
Limited One-Year Warranty
This
warranty
gives you specific legal rights. You may also have other rights
which
vary from state to
state.
Dual Electronics
Corp.
warrants
this product to the original
purehaser to be free
from
defects in material and
workmanship
for a period of
one year from the date of the original
purehase.
(Note that select marine products
carry a 2-year warranty. Please visit www.dualav.com for details.) Dual Electronics
Corp. agrees.
at our option, during the warranty period. to repair any defect in
material or workmanship or to furnish an equal
new.
renewed or comparable
product (whichever is deemed necessary) in exchange without charges. subject
to verification of the defect or malfunction and proof of the date of purchase.
Subsequent replacement products are
warranted
for the balance of the original
warranty
period.
Who is covered? This warranty is extended to the original retail purchaser for
products purehased and used in the U.S.A.
What ls covered? This warranty covers all defects
in
material and workmanship
in this
product.
The following are not
covered:
installation/removal costs. damage
resulting from accident. misuse.
abuse.
neglect. product modification.
improper
installation. incorrect tine voltage. unauthorized repair or failure
to
follow
instructions supplied with the product.
or
damage occurring during return shipment
of the product.
What to do?
1.
Before you call
for
service.
check
the troubleshooting guide in your owner's
manual. A slight adjustment of any custom controls may save you a service call.
2.
If you require service during the warranty period, you must carefully pack the
product (preferably in the original package) and ship it by prepaid transportation
with a copy of the original receipt from the retailer to an authorized service
center.
3.
Please describe your problem in writing and include your
name.
a return UPS
shipping address
(P.O.
Box not
acceptable),
and a daytime phone number with
your shipment.
4. For more information and for the location of the nearest autflorized service center
please contact us toll-free at 1-866-382-5476 or by email at [email protected].
Exclusion of
Certain Damages: This warranty is exclusive and in lieu of any
and all other warranties. expressed or
implied.
including without limitation the
implied warranties of merchantability and fitness for a particular purpose and any
obligation.
liability.
right. daim or remedy in contract or tort. whether or not arising
from the company's negligence. actual or imputed. No person or representative is
authorized to assume for the company any other liability in
connection
with the sate
of this product. In no event shall the
company
be liable for indirect. incidental or
consequential damages.
Mounting the Head Unit,
Typical DIN mounting
Stepl,
Insert the mounting sleeve into the
installation kit or
dashboard.
Step2,
Bend multiple mounting tabs around
the mounting sleeve until the mounting
sleeve is secure.
Step3,
Connect all wiring harnesses
and slide the head unit into the
mounting sleeve until
it clicks into
place.
Mounting the Head Unit:
o::--·'
ISO
mounting
""="
.
c:J
-
Using the existing brackets
~
-~~;
or the brackets supplied
~
'.:!:
-
with the installation kit. mount the
""="
~
-~5
brackets lo the sides of the head unit
I'-..~
with the screws supplied with the
~
head unit.
USB Operation
Playing MP3 Files
To play MP3 files.
insert
a USB device containing MP3
files.
Track
Select
Press TUNE • • to skip to the beginning of the next song
.
Press TUNE ...... to skip to the beginning of the previous
song.
Fast Forward and
Press and hold TUNE • • or TUNE,.. ... to fast forward
Reverse
or reverse a track.
Pause
Press
•Ill
to temporarily stop
playback.
Press
•Ill
again to resume playback.
Folder
Access
Folder can be found by pressing Folder Up or Folder
Down.
About 1 second after the folder name is displayed. the first
file under the selected folder will be displayed and
playback.
Repeat
Press RPT to toggle between RPT ALL and RPT
ONE.
• RPT ALL - Plays all tracks on USB
device.
• RPT ONE- Continuously repeats selected track.
Random
Press ROM to play tracks in random
order.
press again to
cancel the ROM function.
lntro
Press tNT to
plays
first 10 seconds of each track. press
again to cancel the INT function.
To download the complete Owner's Manual for your radio.
please visit www.axxeraaudio.com/supporUmanuals.php
FCC Compliance
This device complies with Part 15 of the FCC
Rules.
Operation is subject to the following
two
conditions:
(1)
this device may not cause harmful
interference.
and
(2)
this device must aecept any interference received,
including
interference that may
cause undesired operation.
Warning:
Changes or modifications to tflis unit not expressly approved
by
the party
responsible for compliance could void the user"s authority to operate the equipment.
Note: This equipment has been tested and found to eomply with the limits for a Class 8
digital
device.
pursuant to Part 15
of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful inlerference in a residential installation. This
equipment generates. uses and can radiate radio frequency energy and. if not instaUed
and used in accordance with the instructions. may cause harmful interference to radio
communications.
However. there is no guarantee that interference wilt not occur in a
particular installation. If this
equipment
does cause harmful interference to radio or
television reception. which can be determined by turning the equipm.nt off and on. the
user is encouraged to try to correct the interference
by
one or more of the following
measures:
•
Reorient or relocate the receiving
antenna.
•
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is
connected.
• Consult the dealer or an experienced radio technician for help.
Ouai ElectronicsCorp.
TollfrH:l-866-382-5476
t.4onday·Friday.9At.4-5Pt.4
www.;axxer;aaudio.eom
C20180u.lEtectronlcs Corp.Allrights
re~
ThtBiu~-Gmllt<
...
dloOOIIR-
dbyth
tllluoiOolhSIO.Inc. ~ndtii)"UHOI•ud>matbby
No
.........,gilurwlerlicenH.
NSC0118-W1