Digichain WP6K 사용자 설명서 - 페이지 14

{카테고리_이름} Digichain WP6K에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digichain WP6K 20 페이지. Wallplate control keypad 6-program buttons to send ip&rs232 commands to control third-party devices

페이지 인쇄

Programmable Control Panel

Toggle switching

HDMI CEC on

HDMI CEC off

Main unit standby

Main unit wake up

Source power on

Source power off

Display power on

Display power off

Turn up source volume

Turn down source volume

Source mute

MIC mute

MIC unmute

VGA audio mute

VGA audio unmute

DP audio mute

DP audio unmute

Turn up MIC volume

Turn down MIC volume

DP audio from Embedded

DP audio from External

Front panel lock

Front panel unlock

HDCP on

HDCP off

HDMI output off

HDMI output on

Digichain Electronics

Switch the input source cyclically from

1-HDMI to 5-VGA.

Enable CEC function.

Disable CEC function.

Let the main unit enter standby mode.

Wake up the main unit.

Turn on the source device.

Turn off the source device.

Turn on the display device.

Turn off the display device.

Turn up the volume of source device.

Turn down the volume of source

device.

Mute the source device.

Mute the MIC audio.

Unmute the MIC audio.

Mute the external audio of VGA.

Unmute the external audio of VGA.

Mute the DP embedded audio.

Unmute the DP embedded audio.

Turn up the MIC input audio.

Turn down the MIC input audio.

Select the DP embedded audio.

Select the external audio for DP.

Lock the front panel buttons.

Unlock the front panel buttons.

Enable HDCP output.

Disable HDCP output.

Turn off HDMI output.

Turn on HDMI output.

CEC

function

should

enabled