digico SD12 기술 노트

{카테고리_이름} digico SD12에 대한 기술 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. digico SD12 6 페이지. Replacing and cleaning faders
digico SD12에 대해서도 마찬가지입니다: 매뉴얼 (9 페이지)

TECHNICAL NOTE

Date 20th Jan 17 rev 3

ref 372

Raised by: TC

Distributed to: as required

Soundtracs - Digico(UK) Ltd. unit 10 Silverglade Business Park Chessington Surrey KT9 2QL England

Tel: +44 1372 845600 Fax: +44 1372 845656 email: [email protected]

SD12 and other Win7e based mixers

Use of HORM system and overview screen setup

Introduction to HORM

HORM - Hibernate Once Read Many - This is a Windows 7e function an equivalent to Ready On

as used on the older SD-series consoles based on Win XPe. The functionality of this is slightly

different.

In the same way as Ready On, it protects the C: Drive from unintended changes.

The method of making intended changes is quite different to the older system and is described

below.

The main difference that is immediately seen between HORM and Ready-On is that there is no

command line path to start an application on startup.

NOTE: This means that even with HORM disabled, the SD12 application will still start

automatically and that cannot be prevented.

*In the case of a corrupted startup.ses preventing the console starting up correctly, holding the

SHIFT key will still offer the option of a "default start". Hold the SHIFT key as soon as you see the

SD12 logo appear on the Master screen

Use of HORM system

The access the HORM system quit to Windows from the mixer program.

Touch "Quit to Windows" under the system button.

There is a small icon at the bottom of the Start Bar which is the shortcut to HORM configuration.

The left picture shows the HORM icon when active and with the drive locked (normal use) and the

right picture when available but the drive is not locked.

TN372

Page 1