ARCCAPTAIN ARC200 사용자 설명서 - 페이지 6

{카테고리_이름} ARCCAPTAIN ARC200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ARCCAPTAIN ARC200 15 페이지. Inverter welding machine

Therefore, please note:

1) Ventilation

This industrial welder can create powerful welding current that has strict cooling requirements that

cannot be met with natural ventilation. Therefore two internal fans are very important in enabling the

machine to work steadily with effective cooling. The operator should make sure that the louvers be

uncovered and unblocked. The minimum distance between the machine and nearby objects should be

30cm. Good ventilation is of critical importance to the better performance and longer lifespan of the

machine.

2) Overload is forbidden!

Remember to operate the welder within allowable duty cycle (refer to the corresponding duty cycle).

Make sure that the welding current should not exceed the max load current. Overload could obviously

shorten the machine's lifespan, or even damage the machine.

3) Over-voltage is forbidden!

Regarding the power supply voltage range of the machine, please refer to "Technical Parameters" table.

This machine is of automatic voltage compensation, which enables the maintaining of the voltage range

within the allowable range. In case that the power supply voltage exceeds the allowable value, it would

possibly damage the components of the machine. Users should learn about this circumstance and take

proper precaution.

4) An earth screw is available for the machine. Connect it with an earth cable (section≥6mm2) to avoid

the static and electric shock.

5) A sudden halt may occur with the red indicator of the front panel on while the actual duty cycle of the

welder is over standard duty cycle which triggers temperature detect switch due to overheat. Under this

circumstance, it is unnecessary to unplug the power plug. Keep cooling fan working to cool down the

welder. Welding can be continued after the inner temperature falls into the standard range and the red

indicator is off.

2. PRODUCT OVERVIEW

Unique electric structure and air channel design in this series of

machines can speed up the heat rejection of the power device as well as

improving the duty cycles of the machines. The unique heat rejection

efficiency of the air channel can effectively prevent the power devices

and control circuits from being damaged by the dust absorbed by the

fan, and the reliability of the machine is greatly improved thereby.

The machine adopts streamline shape. Front and rear panels and

handle are sprayed with rubber oil which gives good touch feeling.

Pic 1