Axxera MINI AX550D 설치 및 사용 설명서 - 페이지 7

{카테고리_이름} Axxera MINI AX550D에 대한 설치 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Axxera MINI AX550D 13 페이지. Mini series mobile power amplifiers
Axxera MINI AX550D에 대해서도 마찬가지입니다: 설치 및 사용 설명서 (13 페이지)

페이지 인쇄

Speaker Connections

Connect speaker wires observing polarity. The minimum impedance load for the

AX550D is 2 ohms stereo and 2 ohms mono. Use of loads lower than these is not

recommended and may cause amplifier damage.

CHANNELS 1 & 2

2-8 ohm

Input Signal Connections

Low Level Input (RCA)

Low level (RCA) input signal is preferred for best performance. Typical trunk-mount

amplifier installations require a 17-20 foot RCA cable. Most trucks and under-seat

applications require a 6-9 foot RCA cable. Using twisted pair construction RCA

cables will minimize noise.

Low-Level Input

(RCA)

Note: Do not use both low and high level inputs

at the same time - connect only one or the other.

INSTALLATION

Amplifier Connections

High-Level Input

(speaker cables)

CHANNELS 3 & 4

2-8 ohm

High Level Input

(Speaker Wire)

High level inputs should only be

used when RCA outputs are not

available from the head unit.

Connect the head unit speaker

outputs to the high level input

connector as shown below. The

black wire (signal reference

ground) may or may not require a

connection to chassis ground

- depending on your particular

installation.

SUBWOOFER

2-8 ohm