Digicode DGA 설치 매뉴얼 - 페이지 4
{카테고리_이름} Digicode DGA에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digicode DGA 20 페이지. Surface-mount keypad - cast aluminium
페이지 인쇄INSTALLATION MANUAL
DGA
Cast aluminium Digicode
- the green LED lights on during 1 second to confirm programming of the code length.
3] Enter A5 to modify the master code:
- the green LED lights on during 1 second,
- enter the new 4 or 5 or 6-digit master code,
- the green LED lights on during 1 second to confirm programming of the new master code.
4] Press B to exit from programming mode:
- the red LED lights off to confirm exit from programming.
The red LED flashes 4 times to indicate a data computing error
Master code or user code: 12369
When changing to 4-digit code: enter 2369
When changing to 6-digit code: enter 012369
It is recommended to program the codes in 6-digits
and then modify the code length.
CHANGING THE MASTER CODE
1] Enter the master code twice (12345 default value master code):
- the red LED lights to confirm entry in programming mode.
2] Press A5:
- the green LED lights on during 1 second,
- enter the new master code (according to the code length set up),
- the green LED lights on during 1 second to confirm programming.
3] Press B to exit from programming mode. The red LED lights off to confirm exit from programming.
ADDING USER CODES
Group 1: from user number 00 to user number 59, relay 1
Group 2: from user number 60 to user number 99, relay 2
1] Enter the master code twice (12345 default master code):
- the red LED lights on to confirm entry in programming mode.
- pour programmer des codes :
MASTER CODE
2] To add a user code, enter the user number (from 00 to 99):
- If the user number is free, the green LED lights during 1 second enter the 4, 5 or 6-digit code,
- If the user number is already programmed, the red LED flashes 4 times,
- To modify the user code enter a 4, 5 or 6 digit code,
- To cancel the user code enter 000000 or 00000 or 0000 code,
cdvi.se
4
cdvigroup.com
Self Contained
®
MASTER CODE
RED LED
LIGHTS ON
EN