Digicom HDSL 사용자 설명서 - 페이지 4
{카테고리_이름} Digicom HDSL에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digicom HDSL 9 페이지. External adsl modem for the usb port
Digicom HDSL에 대해서도 마찬가지입니다: 사양 (1 페이지)
페이지 인쇄HDSL
1. GENERAL
1.1. DESCRIPTION
TX
G.703/V35
HDSL
HIGH SPEED MODEM
RX
MASTER
Picture 1
The connection is carried out using 2 HDSL devices: one placed in the main centre (Master)
and the other one in the remote place (Slave). The Master and Slave devices have different
configurations but are equal as for the electric or mechanic features.
All the digicom's HDSL modems are supplied with the following factory configuration:
Master
V.35 selected interface
Two wires connection
256 Kbit/s line speed
Internal clock
1.2. FRONT PANEL VIEW
HDSL
Picture 2
Name
Color
PWR
Green
LINK1
Red
LINK2
Red
V35/G703
Red
MST/SLV
Red
LOOP
Red
ALM LOC
Red
ALM REM
Red
HDSL line 2/4 wires
HIGH SPEED MODEM
Condition
Off
On
Flashing
On
Flashing
Off
On
Off
On
Off
On
Flashing
On
Flashing
On
Flashing
HDSL
HIGH SPEED MODEM
Function
No power supply
Channel 1 Status: Connected with the remote one
Channel 1 Status: Searching
Channel 2 Status: Connected with the remote one
Channel 2 Status: Searching
Channel 2 Status: disabled
V.35 interface selection
G.703 interface selection
Device configured as Master
Device configured as Slave
Local Loop enabled
Loop enabled on the remote device
Problem with G.703 interface
Fault on the local device
Problem with the G.703 remote interface (managed
on Master device only)
Fault on the remote device
1.1
GENERAL
TX
G.703/V35
RX
SLAVE