Axxess Automobile Parts 설치 지침 매뉴얼 - 페이지 7

{카테고리_이름} Axxess Automobile Parts에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axxess Automobile Parts 16 페이지. Metra electronics automobile parts user manual

페이지 인쇄

•

Long flashes represent the wire(s) that are connected to the interface

•

3rd led flash is the Green/Orange wire on the interface

•

5th led flash is the Black/Green wire on the interface

If during the auto detect sequence there was no long led flash, just

short ones, the interface was not connected to the correct wire on the

ASWCSTALK or the incorrect wire was used on the interface.

The 2nd set of led flashes represents what brand radio the interface

believes it is connected to. Each flash is for a different radio manufacturer.

For example if you are installing a JVC radio the interface should blink 5

times.

1st led flash is for Eclipse

2nd led flash is for Kenwood

3rd led flash is for Clarion

4th led flash is for Sony and Dual

5th led flash is for JVC

6th led flash is for Pioneer and Jensen

7th led flash is for Alpine*

8th led flash is for Visteon

9th led flash is for Valor

10th Clarion 5V

* Note: If the interface flashes 7 times and you do not have an Alpine

radio connected to it that means that the interface did not see any radio

connected. Verify the 3.5mm connector is connected to the SWC input on

the radio.