Axxess AX-GMCL2-SWC 설치 지침 매뉴얼
{카테고리_이름} Axxess AX-GMCL2-SWC에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axxess AX-GMCL2-SWC 12 페이지. Gm data interface with swc 2000-2013
Axxess AX-GMCL2-SWC에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (12 페이지)
페이지 인쇄
GM Data Interface with SWC
• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
• Provides NAV outputs (parking brake,
reverse, and speed sense)
• Retains chimes
• Retains audio controls on the steering wheel
• Retains OnStar / OE Bluetooth
• Adjustable OnStar level
* The RSE must be activated by the factory radio
• AX-GMCL2-SWC interface • AX-GMCL2-SWC harness
• 16-pin harness with stripped leads
• 4-pin harness with stripped leads
• Female 3.5mm connector with stripped leads
Axxess Integrate
®
Installation instructions for part AX-GMCL2-SWC
AX-GMCL2-SWC
2000-2013
INTERFACE FEATURES
• Retains the factory AUX-IN jack
• Retains RSE (rear seat entertainment) *
• Retains SAT (satellite radio)
• Can be used in non-amplified, or analog/
digital amplified models
• Retains balance and fade (excludes digital
amplified models)
• Micro "B" USB updatable
INTERFACE COMPONENTS
APPLICATIONS
See application list inside cover
®
Table of Contents
Connections to be made ................................................3-6
For models without an amplifier .................................. 3
For models with an analog amplifier ........................... 4
For models with a digital amplifier .............................. 5
3.5mm jack steering wheel control retention ............. 6
Installing the AX-GMCL2-SWC ......................................... 6
Initializing & programming the AX-GMCL2-SWC .........6-7
Adjusting the AX-GMCL2-SWC ......................................... 8
Extra features ................................................................8-9
Steering wheel control extra settings.........................9-12
L.E.D. feedback ............................................................. 9
Changing radio type ................................................... 10
Remapping the steering wheel control buttons ........ 10
Resetting the AX-GMCL2-SWC ................................... 12
TOOLS REQUIRED
• Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell caps, etc.)
• Small flat-blade screwdriver
CAUTION!
All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
© COPYRIGHT 2016 METRA ELECTRONICS CORPORATION