ABB M2301 제품 설명서 - 페이지 7

{카테고리_이름} ABB M2301에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ABB M2301 13 페이지. Mini-system controller

ABB M2301 제품 설명서
7

Mounting/Installation

Warning
Electric voltage!
Dangerous currents flow through the body when coming into direct or indirect
contact with live components.
This can result in electric shock, burns or even death.
7.1

Requirement for the electrician

Warning
Electric voltage!
Install the device only if you have the necessary electrical engineering
knowledge and experience.
The minimum necessary expert knowledge and requirements for the installation
are as follows:
Product manual 2TMD041600D0157
Disconnect the mains power supply prior to installation and/or disassembly!
Permit work on the 110-240 V supply system to be performed only by
specialist staff!
Incorrect installation endangers your life and that of the user of the electrical
system.
Incorrect installation can cause serious damage to property, e.g. due to fire.
Apply the "five safety rules" (DIN VDE 0105, EN 50110):
1. Disconnect
2. Secure against being re-connected
3. Ensure there is no voltage
4. Connect to earth and short-circuit
5. Cover or barricade adjacent live parts.
Use suitable personal protective clothing.
Use only suitable tools and measuring devices.
Check the type of supply network (TN system, IT system, TT system) to
secure the following power supply conditions (classic connection to ground,
protective grounding, necessary additional measures, etc.).
Mounting/Installation
│7