Digicom 4G Industrial VPN 빠른 매뉴얼 - 페이지 9

{카테고리_이름} Digicom 4G Industrial VPN에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digicom 4G Industrial VPN 13 페이지. Dual sim industrial 4g vpn router with wi-fi for 4g lte/ hspa/umts/edge/gprs networks

페이지 인쇄

4G Industrial VPN

2.2. REAR VIEW

As shown in the following pictures, 4G Industrial VPN router has two SIM card slots.

Install SIM Card

• Remove slot cover

1. Make sure power supply is disconnected.

2. Use a screwdriver to remove the screw on the cover, and then remove the cover, you will find the SIM Card slots.

• Inserting SIM Card

3. Insert the SIM card. Press the card with your fingers until you hear "a click sound". Then use a screwdriver to screw the

cover.

• Removing SIM Card

4. Make sure router is powered off.

5. Press the card until you hear "a click sound" till the card will pop up to be pulled out.

Notes:

Please use the specific M2M SIM card when the device works under extreme temperature conditions

(temperature exceeding 0-40 C), because the long-time working of regular SIM card in harsh environment

(temperature exceeding 0-40 C) may increase the possibility of SIM card failure.

Don't forget to screw the cover for again-theft.

Don't touch the metal surface of the SIM card in case information in the card is lost or destroyed.

Don't bend or scratch your SIM card. Keep the card away from electricity and magnetic fields.

Make sure router is powered off before inserting or removing your SIM card.

Connect the External Antenna

Connect the router to an external antenna connector. Make sure the antenna is within the correct frequency range and it is

screwed tightly.

Quick Guide