Accurex PCX-200 Series 사용자 설명서 - 페이지 5

{카테고리_이름} Accurex PCX-200 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Accurex PCX-200 Series 8 페이지. Weighing indicators

To return the balance to its initial position, remove the container and

press the "TARE" key, which will return the balance to the initial

position of 0.00.

It is advisable to use a container for weighing, as this will not damage

the balance plate. This also protects the scale from possible shocks

and increases its life.

AUTO-ZERO key

If the zero value changes during weighing, press the "TARE" key to

reset the display to zero.

CALIBRATION

Place the balance on a flat surface

Turn the scale on, when the display shows 0.00, press the "UNIT" key for

6 seconds.

The display will show the calibration value, this value may be modified by

pressing the "TARE" key. The user must choose the weight with which to

carry out the calibration, being able to choose between 10/ 20 or 50kg.

Once the calibration weight has been set, press the "UNIT" key, the display

will show the message CAL and then the selected weight value will flash

(10/20 or 50kg). Place the weight on the weighing platform and the

message "PASS" will appear, then the calibration procedure will be

completed.

If the scale is faulty and cannot be calibrated, the message "Err" will be

displayed and it will switch off automatically.

You can press the "ON/OFF" key to stop the calibration procedure.