Epson 11880 - Stylus Pro Color Inkjet Printer 포장 풀기 및 설정 매뉴얼 - 페이지 22

{카테고리_이름} Epson 11880 - Stylus Pro Color Inkjet Printer에 대한 포장 풀기 및 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 11880 - Stylus Pro Color Inkjet Printer 28 페이지. Stylus pro11880
Epson 11880 - Stylus Pro Color Inkjet Printer에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (14 페이지), 브로셔 (1 페이지), 브로셔 및 사양 (8 페이지), 네트워크 매뉴얼 (46 페이지), 제품 정보 매뉴얼 (10 페이지), 제한 보증 (12 페이지), 브로셔 및 사양 (7 페이지), 브로셔 및 사양 (8 페이지)

페이지 인쇄

Epson 11880 - Stylus Pro Color Inkjet Printer 포장 풀기 및 설정 매뉴얼

6. Set the paper lever to the secured position, and

then close the front cover.

Press the

button or wait a while.

7. If DO YOU WANT TO USE THE FOLLOWING PAPER?

appears on the LCD panel, press the Menu

button to select the media, and then press the

Enter

button to set the media.

The previous setting appears on the LCD

panel. If the media type is correct, press the

Paper Source

button.

Note:

Do not leave the paper in the printer for a long period

of time; its quality will deteriorate. We recommend that

you remove the paper from the printer after printing.

Connecting the Printer with Your

Computer

Connect the printer and computer with a USB

cable or Ethernet cable. Use the following cables.

❏ USB cable

❏ 100BaseTX or 1000BaseT Category 6 Shielded

twisted-pair cable

1. Make sure the printer is turned off.

2. Connect the cable to the printer, and plug the

other end of the USB cable to the computer or

the other end of the Ethernet cable to the

Ethernet hub.

USB connection:

Network connection:

Note:

When you connect both USB cable and Ethernet cable,

install the printer software from each computer

separately. You can connect both USB cable and

Ethernet cable to the printer at the same time.