Axxess AXDSPL-MST1 설치 지침 매뉴얼 - 페이지 3

{카테고리_이름} Axxess AXDSPL-MST1에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axxess AXDSPL-MST1 16 페이지. For gm dsp interface with amp bypass harness 2014-2018

페이지 인쇄

1. Locate the factory amp. Unplug and remove the amp.

Note: Amp location is on the following page.

2. Install the AX-DSPX-MST1 amp bypass harness to the vehicle and make all necessary

connections, but leave the amp turn-on wire disconnected.

3. Connect the AX-DSPX-MST1 amp bypass harness to the AX-DSPX-MST1 interface.

4. Connect the AX-DSPX-MST1 interface harness to the AX-DSPX-MST1 interface.

5. Download and install the AX-DSP-XL app from the Google Play Store or Apple App Store.

6. Cycle the ignition on.

7. Open the app then select the Bluetooth Connection tab. Follow the instructions to pair the

mobile device to the interface. Refer to page 8 for more information. (Figure A)

8. Scroll to the Configuration tab then select the vehicle type. Press the Lock Down ‡ button to

save the configuration. Refer to page 9 for more information. (Figure B)

9. Connect the amp turn-on wire.

INSTALLATION

Continued on the next page

(Figure A)

(Figure B)

REV. 3/2/2020 INSTAXDSPL-MST1