Axxess AXDSPL-MZ1 설치 지침 매뉴얼 - 페이지 11

{카테고리_이름} Axxess AXDSPL-MZ1에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axxess AXDSPL-MZ1 16 페이지.

Crossover Adjust

• Select the desired crossover filter per channel, low pass, band pass, or high pass.

• Select the desired crossover slope per channel, 12db, 24db, 36db, or 48db.

• Select the desired crossover frequency per channel, 20hz to 20khz.

Note: The front and rear channels default to a 100Hz high pass filter to keep the low frequency

signals out. If a subwoofer is not being installed, change the front and rear crossover points down

to 20Hz for a full range signal, or to the lowest frequency the speakers will play down to.

MOBILE APP

(CONT.)

Continued on the next page

REV. 11/3/2020 INSTAXDSPL-MZ1