Epson 1280 - Stylus Photo Color Inkjet Printer 제품 정보 - 페이지 12

{카테고리_이름} Epson 1280 - Stylus Photo Color Inkjet Printer에 대한 제품 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 1280 - Stylus Photo Color Inkjet Printer 13 페이지. Product support bulletin(s)
Epson 1280 - Stylus Photo Color Inkjet Printer에 대해서도 마찬가지입니다: 카트리지 교체 (2 페이지), 제품 지원 게시판 (6 페이지), 제품 지원 게시판 (1 페이지), 보충 설명서 (1 페이지), 사용자 설명서 (27 페이지), 호환성 매뉴얼 (1 페이지), 보충 설명서 (2 페이지), 여기에서 시작 (2 페이지), 브로셔 및 사양 (2 페이지), 여기에서 시작하기 매뉴얼 (6 페이지), 사양 (2 페이지), 사용자 설명서 (12 페이지), 제품 지원 게시판 (3 페이지), 제품 지원 게시판 (2 페이지), 제품 지원 게시판 (4 페이지), 제품 지원 게시판 (7 페이지), 시작하기 매뉴얼 (32 페이지), 설치 지침 매뉴얼 (8 페이지)

Epson 1280 - Stylus Photo Color Inkjet Printer 제품 정보
EPSON Stylus Photo 1280
7. If you want to check the results, click
another test page. Make sure the middle line (numbered 8)
in each group is the best. If it isn't, you may need to repeat
step 6 more than once to align your print head completely.
8. Click
and follow the instructions on the screen to
Next
print two columns of boxes.
9. Select the box with the least grainy appearance (smoothest
gray) from the first column, then enter its number in box #1
on screen. Then choose the best box from the second
column and enter its number in box #2 on screen.
10. If you want to check the results, click
reprint the boxes. Make sure the middle box (numbered 5)
in each column is the best. If it isn't, you may need to repeat
step 9 more than once.
11. When done, click
Finish

Cleaning the Printer

To keep your printer working at its best, you should clean it
several times a year. Follow these steps:
1. Turn off the printer and wait for the Ppower light to go
out.
2. Unplug the power cord and disconnect the printer cable.
3. Remove all the paper from the sheet feeder.
4. Clean the exterior of the printer with a soft, damp cloth.
Don't touch the gears inside the printer.
Never use a hard or abrasive brush, or alcohol or thinner
for cleaning; they can damage the printer components
and case.
Don't get water on the printer components and don't
spray lubricants or oils inside the printer.

Transporting the Printer

If you move your printer some distance, you need to prepare it
for transportation in its original box or one of a similar size.
To avoid damage, always leave the ink cartridges
installed when transporting the printer.
Be sure to remove the tape used in step 4 after installing
the printer in its new location.
Follow these steps:
1. Turn on the printer, wait until the print head locks in the
far right position, then turn off the printer.
12 - EPSON Stylus Photo 1280
to print
Realignment
Realignment
.
2. Unplug the power cord from the electrical outlet. Then
disconnect the printer cable from the printer.
3. Remove any paper from the printer and remove the paper
support.
4. Open the printer cover. Secure the ink cartridge holder to
the printer with tape as shown, then close the printer cover.
to
5. Push in the output tray extensions and close the tray.
6. Repack the printer and attachments in the original box
using the protective materials that came with it. See the
Start Here poster for details.
Be sure to keep the printer level as you transport it.
After transporting the printer, remove the tape securing the
print head and test your printer. If you notice a decline in
print quality, clean the print head (see page 10); if output is
misaligned, align the print head (see page 11).

Related Documentation

TM-890/1280
PL-SP1280
CPD-11716
CPD-11717
CPD-11718
1/01
Tape the ink cartridge holder
to the printer case
EPSON Stylus Photo 890/1280 Service
Manual
EPSON Stylus Photo 1280 Parts Price
List
EPSON Stylus Photo 890/1280 Printer
Basics
EPSON Stylus Photo 890/1280 Start Here
EPSON Stylus Photo 1280 printer
software CD-ROM