Accurex DSX-30 사용자 설명서 - 페이지 5

{카테고리_이름} Accurex DSX-30에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Accurex DSX-30 10 페이지.

4. When used, the center of gravity of the weighing object must be located in the center of the scale

plate, and the weighing object should not exceed the scope of the scale plate, to ensure its accuracy.

5. Before using the electronic balance, please heat up the engine for 15 ~ 20 minutes.

Display and key panel description

Keyboard Functions

1. 【 ZERO 】 key：When there is nothing on the scale, but the screen has a tiny weight appears, press

this key to make the weight to zero.

2. 【 UNIT 】 key：Weighing unit select, you can choose KG/G or LB as your weighing unit, if you received

the scale maximum capacity ≤15kg, the unit will be as G, if you received the scale maximum

capacity≥30kg,the unit will be as KG; in weighing/counting mode, the key is used to set upper and lower

alarm range.

3. 【 TARE 】 key： In the normal state, to clear the tare of the item; In counting/percentage/set alarm/weight

calibration mode, the key used for confirm.

4. 【 SETUP 】 key：In counting/percentage mode, used for sampling.

5. 【 ↑ 】 key：Number input key, used to input numbers or select numbers.

6. 【 MODE 】 key：Function mode select, you can select weighing, counting, percentage three modes.