Epson 1400 CFS 설치 지침 매뉴얼 - 페이지 5

{카테고리_이름} Epson 1400 CFS에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 1400 CFS 15 페이지.

Measure 6 1/2" from the back edge, left side, of the larger two openings in the top of the

printer housing. Using a marker or pencil place a line across the center divider between

the two access holes. This is the location of the top of the 1400 Bridge Bracket.

Place mark 6 1/2" from the back of the larger opening

Close-up of measurement

After marking the location of the back edge of the clip, the 1400 bridge bracket can be

installed. When installing the bracket, be sure to line up the left most edge of the clip

with the mark that you have just made. Note that the bent part of the bracket should be

toward the front of the printer.

Install 1400 Bridge Bracket using the mark to locate the left edge

Step 6

The next step is to mark the location of the Beige Clip. This clip will be installed in line to

the right of the 1400 bridge bracket.

S a v e

M o n e y

a n d

I m p r o v e

Y o u r

P r i n t i n g

MIS Associates Inc

2901 Auburn Rd

Auburn Hills, MI 48326

800-445-8296

http://www.inksupply.com

Fax: 248-289-6013