Digicom Archimede SMS 운영 핸드북 - 페이지 3

{카테고리_이름} Digicom Archimede SMS에 대한 운영 핸드북을 온라인으로 검색하거나 PDF를 다운로드하세요. Digicom Archimede SMS 18 페이지. Remote alarm system

1. INTRODUCTION

Congratulations in having chosen the Digicom Archimede SMS Alarm Unit

The Archimede SMS Alarm Unit utilizes the latest GSM Dual Band Modem Technology to detect

any alarm state occurring on up to 8 inputs and generates an SMS message accordingly. .

This SMS message can be sent up to a maximum of 3 seperate mobile telephones indicating

clearly the Alarm origin for example Smoke, Gas, Fire, Water, Unlawful Entry etc. also it is

possible to send an SMS message from a remote mobile telephone in order to close a contact

thereby resetting an alarm or closing/opening a circuit breaker which in turn can control valves,

turn on water sprinkler systems, activate door openers etc. For instance the Archimede can

monitor the electricity supply and inform you immediately of any failure which could cause

refrigerated goods damage or burst water pipe damage. The unit can be used in Agriculture and

Zoological applications to monitor and control irrigation, feeding and heating operations from a

remote source. In the event of a general power failure the Archimede will use its internal standby

battery to send a "Power Down" signal before automatically closing down.

The unit has been designed to operate over most GSM networks utilizing a normal SIM readily

available from local operators.

The Archimede SMS Alarm Unit conforms to class 4 (900 Mhz) and Class 1 (1800 Mhz)

Power

12V DC ± 20% or 12V AC ± 20% (the unit has a built in regulator).

Dimensions

The unit is housed in a DIN EN50022 container equivalent to 4 DIN modules

(71x90x73mm) ensuring easy placement alongside contact breakers, fuses and alarm

modules in a DIN rail assembly.

Weight 200 Gr

Operating Temperature

From –10°C to + 50°C

Antenna Connection

SMA Female (supplied with Stub Antenna.Optional 2 meter Antenna is available on

request

Input/Output and Power Connection

Screw terminal block accepting up to 0,75mm (AWG18) cabling.