Axxess AXDSPL-GM31 설치 지침 매뉴얼 - 페이지 5

{카테고리_이름} Axxess AXDSPL-GM31에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axxess AXDSPL-GM31 16 페이지. Gm dsp interface withpre-wired harness 2019-up

16-pin Header

AX-DSPL-BT

BLUETOOTH STREAMING INTERFACE

AX-DSPL-BT

• The AXDSPL-BT Bluetooth streaming interface can be used to stream media directly to

the interface.

• While streaming media the volume on the phone will be used. As an option, the

AXBK-1 (sold separately) can be used to control the volume.

Note: The bass knob included with the AXDSPL-GM31 can be used if it will not be used

to control a subwoofer.

1. Important! Unplug the interface from the vehicle.

2. Remove (4) Phillips screws securing the interface, then remove the top cover, exposing

the circuit board within.

3. Locate the 16-pin header on the circuit board.

Important!

Referencing how the AXDSPL-BT is laid out in the picture, carefully line up

the header pins to the interface. Gently press down to secure.

Note: Both interfaces may be damaged if installed wrong.

5. Reinstall the top cover to complete the installation.

AXBK-1 Installation:

6. Connect the Brown wire from the interface to the Orange wire from the AXBK-1.

Ground the Black wire from the AXBK-1.

Continued on the next page

REV. 8/4/2020 INSTAXDSPL-GM31