Axxess GMOS-05 애플리케이션 - 페이지 5

{카테고리_이름} Axxess GMOS-05에 대한 애플리케이션을 온라인으로 검색하거나 PDF를 다운로드하세요. Axxess GMOS-05 8 페이지. Gm dock n’ lock data interface 2000-2005
Axxess GMOS-05에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (8 페이지)

페이지 인쇄

1) Turn the ignition on if not already, and then turn the radio on to verify that the radio

works. Check balance and fader controls for proper operation.

2) Push the OnStar button (if equipped) to verify OnStar is working. The radio will shut off or

mute, depending if the Brown wire on the 16-pin harness is connected, and OnStar will

be heard through the front speakers. Turn off OnStar and the radio will turn back on.

Chime Volume Adjustment

To adjust the chime volume, use a small

screwdriver to rotate the potentiometer

clockwise to make the chime louder and

counterclockwise to make it softer. The

potentiometer is located on 16-pin side

of the GMOS-05.

OnStar Level Adjustment

To adjust the OnStar volume level find the

Black/Yellow wire on the 16-pin harness.

Push the blue OnStar button, while the

voice is speaking tap the Black/Yellow wire to ground. There are 4 volume settings for

OnStar; once the 4th setting is reached and the Black/Yellow wire is tapped to ground it

will automatically go back to the first volume setting. Once the volume is set it will stay at

that volume until the Black/Yellow wire is tapped to ground again. This can be set during

installation and then left alone. If user adjustment is desired, the customer may also tap

volume up or down on the steering wheel (if equipped) to adjust the OnStar level.

GMOS-05

Testing the GMOS-05