Epson 24-PIN DOT MATRIX PRINTER LQ-680PRO 사용자 설명서 - 페이지 16
{카테고리_이름} Epson 24-PIN DOT MATRIX PRINTER LQ-680PRO에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 24-PIN DOT MATRIX PRINTER LQ-680PRO 22 페이지. 24-pin dot matrix printer
Epson 24-PIN DOT MATRIX PRINTER LQ-680PRO에 대해서도 마찬가지입니다: 빠른 참조 (12 페이지), 사용자 설명서 (17 페이지), 사양 (2 페이지), 사양 (3 페이지), 참조 매뉴얼 (34 페이지), 설정 매뉴얼 (2 페이지)
페이지 인쇄
2.
Switch the PC on. Windows starts automatically. Then switch the printer on.
3.
Insert the CD-ROM containing the printer software into the CD-ROM drive.
TheAutoPlay function of the CD-ROM drive automatically starts the installation
program on the CD-ROM.
If the installation program does not start automatically, click on Start and then on
Run. In the Run dialog box, enter the drive letter of your CD-ROM drive in the
command line (e.g. E:\), followed by the command START.EXE (e.g.
E:\START.EXE) and click on the OK button.
Note:
If your CD-ROM drive has a drive letter other than "E", substitute the appro-
priate letter. The installation program starts. The subsequent procedure is
menu-driven, i.e., you can select the relevant options from a list simply by
clicking with the mouse. The remainder of the installation is automatic and you
do not need to enter any more information.
4.
Select the desired options and follow the on-screeen instructions.
5.
After the printer software has been successfully installed, click on the button
identified by a door icon to exit the installation program.
When you install the printer driver on Windows Me, 98, 95, 2000 or NT 4.0, EPSON
Status Monitor 3 will also be installed.
For information on opening and using the software, see Chapter 3, "Using the Printer
Software" in the online User's Guide.
Installing the Printer Software in Windows 3.1 or NT 3.5x
Follow the steps below to install the printer software in Windows 3.1 or NT 3.5x
systems.
Note:
Installing the printer software on Windows NT 3.5x may require administrator privi-
leges. If you have problems, ask your administrator for more information.
1.
Make sure Windows 3.1/ NT 3.5x is running and the Program Manager window
is open.
2.
Insert the EPSON printer software CD shipped with your printer in the CD-ROM
drive.
Note:
If your system does not have a CD-ROM drive, you can make a floppy disk
version from which to install the printer software.
16
Installing the Printer Software