Axxess ABTI-GM1 설치 지침 매뉴얼 - 페이지 6

{카테고리_이름} Axxess ABTI-GM1에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axxess ABTI-GM1 8 페이지. Gm class ii interface for handsfree bluetooth car kits

8) Connect the white 8-pin plug on the IHF-1000 cable to the power cable, and connect the

other end of the power cable to the ABTI-GM1 module.

9) Install the IHF-1000 keypad on the dashboard of the vehicle, and route the wire to the IHF-

1000 harness. Attach the keypad connector to the harness.

10) Install the IHF-1000 microphone in an appropriate location (see IHF-1000 instructions), route

the wire to the IHF-1000 harness, and attach the microphone connector to the harness.

11) Secure all components, and reinstall the radio.

12) Reconnect the vehicle battery.

OPERATION

Refer to the Motorola IHF1000 manual for operation. Adjust the volume of the handsfree kit by

turning the volume knob of the radio. Audio from any source will be muted when a call comes

in or a call is made.

INSTALLING THE ABTI-GM1 WITH PARROT

HANDSFREE CAR KITS

*Note: The ISO to 8 way connector harness will be used in this application.

*Note: The 8 way to 8 way connector harness will NOT be used in this application.

Compatible Parrot kits: CK3000, CK3000 Evolution, CK3100, CK3300, CK3500, 3200LS,

3400LS-GPS, MK6000, MK6100

(Installation will be the same as the Motorola Handsfree kit steps 1-7)

8) Plug the 8 way side of the ISO to 8 way harness into the 8 way connector on the ABTI-GM1.

ABTI-GM1

FROM CAR

IHF-1000 keypad

White

8 pin

plug

ABTI-GM1