Epson 3880 - Stylus Pro Color Inkjet Printer 네트워크 매뉴얼 - 페이지 11

{카테고리_이름} Epson 3880 - Stylus Pro Color Inkjet Printer에 대한 네트워크 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 3880 - Stylus Pro Color Inkjet Printer 39 페이지. Printer
Epson 3880 - Stylus Pro Color Inkjet Printer에 대해서도 마찬가지입니다: 브로셔 (3 페이지), 사양 (2 페이지), 브로셔 및 사양 (8 페이지), 여기에서 시작 (2 페이지), 여기에서 시작하기 매뉴얼 (6 페이지), 제한 보증 (12 페이지), 컬러 관리 매뉴얼 (47 페이지), 브로셔 및 사양 (8 페이지), 네트워크 매뉴얼 (38 페이지), 빠른 시작 매뉴얼 (2 페이지)

Chapter 2

Setting Up Your System for Network Printing

This section describes the general procedure on how to set up the network

interface.

1. Check the network interface operation.

Check the functions and operations of the network interface, such as the

status lights. See "Network Interface Operation" on page 9 for details.

2. Install the necessary network components on your computers.

Make sure that the necessary network components (such as TCP/IP) are

installed on your computers, and network settings (such as the IP address,

subnet mask, etc.) are set.

3. Connect the network interface to the network.

Connect the network interface to the network. See "Connecting the

Network Interface to the Network" on page 16 for details.

4. Configure the network interface and install the printer driver.

See "Configuring the Network Interface" on page 17 for details.

5. If necessary, configure the network settings of the network interface using

EpsonNet Config.

Configure the network interface using EpsonNet Config. For Windows

users, see "About EpsonNet Config" on page 26. For Macintosh users, see

"About EpsonNet Config" on page 27.

Setting Up Your System for Network Printing