Checking and Aligning the Print Head
Checking and Aligning the Print Head
If your prints look grainy or blurry, or you see
misregistration or "ghosting," you need to align the print
head. First, you need to make sure the nozzles are clean.
Running a Nozzle Check and
Auto Cleaning
You can turn on Auto Cleaning at the same time you
check the print head nozzles. The printer prints the check
pattern, reads it, and automatically runs a cleaning cycle
if necessary. First, make sure paper is loaded in the tray.
1
Go to the Utilities in your EPSON printer driver.
In Mac OS X, you'll find it in the Epson Printer
Utility in the Applications folder.
2
Click the Nozzle Check icon.
3
Click Auto and follow the instructions on the
screen.
Note:
You can also run a cleaning cycle by
pressing the Menu button and holding it for
more than 3 seconds.
Aligning the Print Head
After you check the print head and clean it if necessary,
follow these steps to align the print head:
1
Make sure the printer is turned on. Then load
EPSON Enhanced Matte or Premium Luster
Photo Paper.
2
Press the Menu button.
3
Press the
button to display HEAD
ALIGNMENT. Then press Menu. You see
PAPER THKNS.
4
Press the Menu button again so that *STD
appears on the display. This is the correct
thickness setting for most EPSON papers,
including Enhanced Matte paper.
5
Press the Menu button to register the
value, then press the
PAPER THKNS again.
6
Press the
button to display ALIGNMENT.
7
Press the Menu button to display AUTO,
then press Menu again. You see UNI-D
(uni-directional). This is the type of
alignment to start with.
8
Press the Menu button again to start the
alignment process. Head alignment takes about
7 minutes.
Caution:
Make sure you don't open the top cover or
turn off the printer during the alignment process.
9
When the uni-directional alignment is finished,
press the
button until you see BI-D BLK .
Then press the Menu button again to start the
bi-directional black alignment.
10
When the bi-directional black alignment is
finished, press the
BI-D ALL. Then press the Menu button again.
11
When the final alignment is finished, press the
Pause button.
4
button to display
button until you see
페이지 인쇄