Epson 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer 시작하기 매뉴얼 - 페이지 6
{카테고리_이름} Epson 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer 10 페이지. Ink fill for the refillable cartridge system
Epson 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer에 대해서도 마찬가지입니다: 설치 매뉴얼 (4 페이지), 사용 지침 (5 페이지)
페이지 인쇄
Note: If the Windows server has a firewall enabled, you may need to
enter a user name and password. Contact your network administrator for
assistance or see your Windows Help for more information.
14. Click
to add the printer.
Add
You see the ColorBurst RIP Print Server name in the printer list.
Tip: To rename the printer, highlight the name of the ColorBurst RIP, click
Show Info, type a new name, then click Apply Changes.
15. Close the Printer Setup Utility. You're ready to print to the ColorBurst
RIP.
Windows Clients Printing to a Windows RIP Server
ColorBurst supports Windows XP and 2000. Other versions of Windows
are not supported.
Note: Make sure the ColorBurst RIP is shared on the server.
1. Make sure the network is set up and the ColorBurst RIP is running.
2. Windows XP: Click
Hardware > Printers and Faxes
Windows 2000: Click
3. Double-click the
4. Make sure the
Start > Control Panel > Printers and Other
Start > Settings > Printers
icon, then click
Add Printer
Network printer
.
Next
button is selected. Then click
5
.
.
Next
.