Axxess TRIGGER 설치 지침 매뉴얼 - 페이지 16

{카테고리_이름} Axxess TRIGGER에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axxess TRIGGER 19 페이지.

페이지 인쇄
Axxess TRIGGER 설치 지침 매뉴얼
Custom Mode 5: Generic three-output delay/pulse width,
edge driven (for use with linear actuators)
Description: When either input goes active, each output will go active after a
delay, and then stay active for a pulse width. Each output has an independent
delay and pulse width, definable between .1 and 300 seconds.
Connections:
Interface wiring
Pin 2 (Purple)
Pin 3 (White)
Pin 4 (Pink)
Pin 5 (Orange)
Pin 6 (Green)
Pin 7 (Red)
Pin 8 (Blue)
Pin 9 (Brown)
Pin 10 (Gray)
To
Ground
Ground
Ground
Ground
Negative output (500 mA max)
Negative output (500 mA max)
Positive output (2 amp max)
Positive pulse input (use only one)
Negative pulse input (use only one)