Axxess TRIGGER 설치 지침 매뉴얼 - 페이지 9
{카테고리_이름} Axxess TRIGGER에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axxess TRIGGER 19 페이지.
페이지 인쇄
Mode 10: Theft detection/closed loop trigger
Description: When connected, if item loses ground the Trigger will send out a
12 volt constant signal which can be hooked to an audible device.
Connections:
Interface wiring
Pin 3 (White)
Pin 5 (Orange)
Pin 8 (Blue)
Pin 10 (Brown)
Mode 11: Channel expander
Description: Gives the ability to add additional channels to an alarm, etc...
Connections:
Interface wiring
Pin 2 (Purple)
Pin 3 (White)
Pin 5 (Orange)
Pin 6 (Green)
Pin 7 (Red)
Pin 8 (Blue)
Pin 9 (Brown)
Pin 10 (Gray)
To
Ground
Ground
Positive of siren (not included)(2 amp max)
Items ground point.
To
Ground
Ground
Ground
Negative latched output (500 mA max) (2 pulses to activate)
Negative latched output (500 mA max) (1 pulse to activate)
Positive latched output (2 amp max) (3 pulses to activate)
Positive pulse input (use only one)
Negative pulse input (use only one)