Epson 480SX 설치 및 운영 매뉴얼 - 페이지 5

{카테고리_이름} Epson 480SX에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 480SX 11 페이지. Product information guide
Epson 480SX에 대해서도 마찬가지입니다: 제품 정보 시트 (4 페이지), 브로셔 (2 페이지)

페이지 인쇄

7. Read the license agreement and click

Main Menu:

8. Click

Install Printer Driver (parallel only)

printer driver installation screen:

9. Click

. The installer copies the necessary files.

Several windows open on your screen. Wait a few moments,

then continue with the next section to install ink cartridges.

Install Ink Cartridges

Once your software is installed, you see the Setup Utility that

walks you through installing ink cartridges.

Before handling your ink cartridges, be sure to read and follow

these ink cartridge precautions:

Install both ink cartridges, and leave them installed for all

types of printing, or the printer won't work.

Remove the yellow tape seal from the top of the ink

cartridges or you'll permanently damage them. Don't

remove the clear seals on the bottom or ink will leak out.

The ink cartridges packed with your printer are for initial

installation only.

Don't move the ink cartridge holders by hand or you'll

damage the printer.

Don't open an ink cartridge clamp to remove a cartridge

except to replace it with a new one. Once you remove a

cartridge, you can't reuse it, even if it contains ink.

Keep ink cartridges out of the reach of children and do

not drink the ink. If ink gets on your skin, wash the area

thoroughly with soap and water. If ink gets in your eyes,

flush them immediately with water.

1. At the first screen, click

2. Follow the on-screen instructions to install your ink

cartridges.

. You see the

Agree

. You see the

3. Now you need to restart your system. Close any open

windows, then click

Click

, click

Start

, and click

the computer

computer.

After restarting, you can install your bonus software

applications and electronic printer manual. See the Start Here

sheet for instructions.

Printing on Special Media

Whether you print on plain paper or special media, you need

to select the Media Type setting according to the guidelines in

the table below.

For this paper name...

Plain paper and envelopes

EPSON Glossy Photo Greeting Cards

(inside surface)

EPSON 360 dpi Ink Jet Paper

EPSON Iron-On Cool Peel Transfer Paper

EPSON High Quality Ink Jet Paper

EPSON Photo Quality Ink Jet Paper

EPSON Photo Quality Ink Jet Cards

EPSON Photo Quality Ink Jet Note Cards

EPSON Photo Quality Self Adhesive

Sheets

EPSON Photo Quality Glossy Paper

EPSON Photo Paper

EPSON Glossy Photo Greeting Cards

(outside surface)

EPSON Photo Quality Glossy Film

EPSON Photo Stickers

EPSON Ink Jet Transparencies

Matte Paper - Heavyweight

Additional Media Loading Guidelines

Don't use the cleaning sheets that may be included with

your special media; they may damage the printer.

Always handle sheets by the edges, and don't touch the

printable surface.

Be sure to load the printable (whiter) side of the media face

up in the sheet feeder.

You can load paper up to the arrow mark on the left edge

guide.

In addition to the

the correct

Paper Size

software.

6/00

EPSON Stylus COLOR 480SX

at the Main Menu to close it.

EXIT

, select

Shut Down

Restart

to restart your

Yes

Select this Media Type

setting

Plain paper

360 dpi Ink Jet Paper

Photo Quality Ink Jet Paper

Photo Paper

Photo Quality Glossy Film

Ink Jet Transparencies

Matte Paper - Heavyweight

setting, remember to select

Media Type

for your media in the printer

EPSON Stylus COLOR 480SX

Restart

- 5