ABB PSE 142 매뉴얼 교체 - 페이지 7
{카테고리_이름} ABB PSE 142에 대한 매뉴얼 교체을 온라인으로 검색하거나 PDF를 다운로드하세요. ABB PSE 142 7 페이지. Changing of hmi module
페이지 인쇄
4. Configuration of the HMI module
The HMI module is programmed for PSE18, follow the step below to change to the correct size of
the Softstarter:
1. Switch on the power supply (terminal 1 and 2).
2. Press and hold the "Exit", "Select", "arrow up" buttons for 3 sec.
3. The display now shows Id.
4. Push "Select". 18 is now flashing in the display.
5. Push "arrow up" one or several times to select the correct size of PSE.
6. Push "Select" to store.
7. Change the other parameters as needed.
8. Put on the marking label for the selected Softstarter.
Ready for start!!
ABB AB Control Products
SE-721 61 Västerås, SWEDEN
Telephone
+46 21 32 07 00
TELEFAX
+46 21 12 60 01
www.abb.com/lowvoltage
- 7 -