Epson 570e - LQ B/W Dot-matrix Printer 제품 정보 매뉴얼 - 페이지 8
{카테고리_이름} Epson 570e - LQ B/W Dot-matrix Printer에 대한 제품 정보 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 570e - LQ B/W Dot-matrix Printer 18 페이지. Warranty statement
Epson 570e - LQ B/W Dot-matrix Printer에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (15 페이지), 사양 (2 페이지), 제한 보증 (1 페이지)
페이지 인쇄
EPSON LQ-570e
The printer provides a variety of paper paths for single sheets
and continuous paper. This section describes how paper feeds
into the printer from the top, front, bottom, or rear.
You can choose from two tractor positions (push and pull) and
three paper entry slots (front, bottom, and rear) for printing on
continuous paper. This section helps you determine which
paper paths and tractor positions are best for your continuous
paper printing needs.
If you often need to tear off sheets of continuous paper (for
printing purchase orders or sales slips, for example), it is best to
use the push tractor. This allows you to use the tear-off edge to
easily tear off printed sheets of continuous paper at the
perforation. When continuous paper is loaded on the push
tractor, you can also load single sheets from the paper guide
without removing the continuous paper from the tractor.
The tractor is installed in the push position when the printer is
shipped.
If you often print on thick or heavy continuous paper, such as
multipart forms or continuous paper with labels, use a tractor in
the pull position. The pull tractor provides the best paper jam
prevention, and allows you to load continuous paper from the
front, rear, or bottom of the printer. However, you cannot use
the tear-off feature with the pull tractor. You can use the front,
bottom, or rear paper slot with the pull tractor.
8 - EPSON LQ-570e
You can improve paper feeding and reduce paper jams by using
two tractors at the same time. This is especially helpful for
printing on continuous preprinted forms, multipart forms, and
for printing high-quality graphics.
4/00