Epson 900N 사용자 설명서 - 페이지 5

{카테고리_이름} Epson 900N에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 900N 13 페이지. Epson stylus color 900n: user guide
Epson 900N에 대해서도 마찬가지입니다: 제품 정보 시트 (4 페이지), 사양 (13 페이지)

페이지 인쇄

Ethernet Card Specifications

Your EPSON Type B Ethernet Interface Card (C823632) lets

you connect the printer directly to your network.

status sheet

button

10BaseT/100BaseTX connectors

Environmental

Temperature

Operation

41 to 95 °F (5 to 35 °C)

Storage

22 to 158 °F ( 30 to 70 °C)

Humidity (without condensation)

Operation

20 to 80% RH

Storage

5 to 95% RH

Vibration

Operation

5 to 55 Hz at 0.4 G

Storage

5 to 55 Hz at 1 G

Shock

4 G

Network Software Supported

NetWare 3.1x, 4.1x, or 5

EtherTalk (AppleTalk )

TCP/IP protocol

1pr, ftp over TCP/IP protocol

NetBEUI over TCP/IP protocol

Network Connectors and Signal

Assignments

RJ-45, ISO/IEC 8802–3 12.6 MDI Specification

Regulatory Approvals

EMC FCC part 15B Class A

Reliability

MTBF 268,973 hr (power on, 100% duty)

link selection light

status lights

Control Panel

The four lights on your printer's control panel show the

printer's status and alert you to problems like paper jams.

black ink

out light

color ink

out light

cleaning button

P is on

The P power light is on when the printer is on and ready to

print. It flashes when the printer is receiving a print job or

performing a maintenance operation, such as cleaning the

print head.

S flashes

When the S paper out light flashes, you have a paper jam.

Turn off the printer and gently pull out all paper. Make sure

none of the sheets are curled, creased, old, stuck together,

or too thin. Then reload the stack against the right edge

guide and slide the left edge guide over to the paper's left

edge. Then turn the printer on.

S is on

When the S paper out light comes on, your paper is out or

incorrectly loaded. Make sure none of the sheets are curled,

creased, old, stuck together, or too thin. Then reload the

stack against the right edge guide and slide the left edge

guide over to the paper's left edge. Press the E load/eject

button to resume printing.

B or A

When an ink out light flashes, your ink supply is low. Make

flash

sure you have a replacement cartridge.

B or A

When an ink out light comes on, you need to replace the ink

are on

cartridge. See page 8 for instructions.

P and S

When the P power and S paper out lights flash and the

B black and A color ink out lights come on, jammed paper

flash,

and

may be blocking movement of the print head. Turn off the

B and A

printer, wait a few seconds, and turn it back on. If no paper

are on

ejects, turn off the printer, remove the jammed paper, and

turn it on again. If the lights still flash or stay on, contact

your dealer or EPSON.

P S B A

When all the lights flash, your printer may have an internal

flash

error. Make sure you removed all the packing material as

described on the unpacking sheet in your printer box. Then

turn off the printer, wait a few seconds, and turn it on again.

If the lights still flash or stay on, contact your dealer or

EPSON.

P S B A

When all the lights are off, the printer is not receiving

are off

power. Try these solutions:

Make sure the printer is turned on.

Turn off the printer, plug in the power cord securely,

and turn on the printer again.

Make sure the outlet is not controlled by a switch or

timer and is operable.

3/99

EPSON Stylus COLOR 900N

paper out light

power button

load/eject button

EPSON Stylus COLOR 900N

power

light

- 5