Circuit ECX03011AU 사용 설명서 - 페이지 8

{카테고리_이름} Circuit ECX03011AU에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Circuit ECX03011AU 19 페이지. 1/10 4wd electric stadium truck

• ALWAYS turn on your transmitter before you turn on the

receiver in the vehicle. Always power off the receiver before

turning your transmitter off.

1. Power off the Electronic

Speed Control (ESC).

4. Remove the battery from the vehicle.

• Seat the motor brushes by driving smoothly on a flat surface

during use of the first battery charge. Failing to do so can

greatly reduce motor performance and functional life.

• Prolong motor life by preventing overheating conditions.

Undue motor wear results from frequent turns, stops and

OPERATION

• ALWAYS operate your vehicle in a wide open area. Operating

the vehicle in a small space or indoors can cause overheating

at low speeds. Operating at low speed increases heat in the

electronic speed control (ESC). Overheating can damage the

vehicle and failure may result.

2. Disconnect the battery.

5. Recharge the battery.

starts, pushing objects, driving in water and tall grass,

and driving continuously up hill.

• Over-temperature protection is installed on the ESC to

prevent circuit damage, but cannot protect the motor from

driving against heavy resistance.

3. Power off the transmitter.