Epson 980N - Stylus Color Inkjet Printer 제품 정보 시트 - 페이지 2

{카테고리_이름} Epson 980N - Stylus Color Inkjet Printer에 대한 제품 정보 시트을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 980N - Stylus Color Inkjet Printer 4 페이지. Warranty statement
Epson 980N - Stylus Color Inkjet Printer에 대해서도 마찬가지입니다: 사양 시트 (2 페이지), 사양 (2 페이지), 제품 정보 매뉴얼 (14 페이지), 업데이트 (1 페이지), 제한 보증 (1 페이지)

Epson 980N - Stylus Color Inkjet Printer 제품 정보 시트
EPSON
4.
First Aid Measures
4.1
Eyes: Immediately flush with room temperature, low pressure, clean water for at least 15 minutes. Seek medical
attention if eye irritation continues.
4.2
Skin: Wash surface areas with soap and water. Wash soiled clothing before rewearing. Seek medical attention if
irritation continues.
4.3
Inhalation: Remove subject to ventilated fresh air. Consult physician if necessary
4.4
Ingestion: Seek medical attention if stomach continues to be upset.
5.
Fire Fighting Measures
5.1
Flammability: Flash point is greater than 230 deg. F / 110 deg. C (closed cup in accordance with ASTM D3278)
5.2
Extinguishing Media: Dry chemical or carbon dioxide
5.3
Fire Fighting Instructions: No special fire fighting procedures are required other than breathing apparatus. No
special explosion hazards are known.
6.
Accidental Release Measures
If a spill occurs, use sponges to wipe-up ink, then rinse area with damp cloth. Place waste in closed container for
disposal. Use proper ventilation. Do not dispose of waste to the sewer. No eye or skin protection required during
clean-up. Wash hands with soap and water.
7.
Precautions for Safe Handling and Use
Keep out of reach of children and do not drink ink. Do not store the cartridge in a high or freezing temperatures.
Keep cartridge out of direct sunlight. Do not dismantle cartridge. Do not store cartridges with oxidizing agents or
explosives. Make sure cartridge is dry before insertion into printer housing.
8.
Exposure Controls and Personal Protection
8.1
Engineering Controls: None required
8.2
Exposure Controls: None required
8.3
Personal Protection: None required when cartridges are used as intended
9.
Physical and Chemical Properties of Ink Formulation
Appearance:
Odor:
pH:
Boiling point:
Freezing point:
Melting point:
Flash point:
Autoflammability:
Explosive properties:
______________________________________________________________________________________________________
PIS # T003011
Page 2 of 4
Black Liquid
None
9.0 – 10.0
Approximately 212 deg. F / 100 deg. C
Less than 32 deg. F / O deg. C
Less than 32 deg. F / O deg. C
Greater than 230 deg. F / 110 deg. C (closed cup, ASTM D3278)
None
None
Version 3.51 (USA)
Release Date 01/04