Epson AccuSuite 11880 Series 빠른 참조 매뉴얼 - 페이지 9

{카테고리_이름} Epson AccuSuite 11880 Series에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson AccuSuite 11880 Series 14 페이지. Network guide
Epson AccuSuite 11880 Series에 대해서도 마찬가지입니다: 브로셔 (1 페이지), 네트워크 매뉴얼 (46 페이지)

페이지 인쇄
Epson AccuSuite 11880 Series 빠른 참조 매뉴얼
Replacing Printer Parts (continued)
Replacing Printer Parts (continued)
6
Hold down the side pin, as shown, then turn the
latch to the right.
7
Release the side pin and carefully remove the cutter
blade.
8
Insert the new cutter blade.
9
Hold down the side pin while turning the latch to
the left.
10
Close the front cover. The cutter returns to the home
position.

Replacing the Maintenance Tank

You need to replace one of the maintenance tanks
(part # C12C890191) when you see MAINT TANK
FULL on the LCD, along with an indication of which
tank is full.
1
Check the LCD to determine which tank needs to
be replaced.
Right
tank
2
Make sure the printer is on, and pull out the
maintenance tank as shown.
Caution:
Do not tip the tank, or ink may spill out.
3
Place the used tank in the plastic bag included with
the new tank.
4
Insert the new tank.
8
Left
tank
Center
tank